İç Mimarlık ve Çevre Tasarımı Bölümü Environmental Control Systems II ders notudur.

Environmental control systems 2 final ders notudur.

Mean radiant temperature (MRT) is the average temperature of the surfaces in a room. Mean radiant temperature can be higher or lower than the air temperature in a room.

Environmental control systems 2 (INAR2034) ders notu içeriği:

• final sınavında çıkabilecek hocanın verdiği 63 soru ve 49'unun cevapları
• What are the environmental factors determining thermal comfort?
• Which factor can we affect by design?
• What are the individual factors determining thermal comfort?
• Which factor affected by interior design?
• Considering thermal comfort as a primarily physical phenomenon
• What is the most important thing that an architect should remember about thermal comfort during the design of a building?
• Why thermal comfort is so important?
• Define and compare a room’s mean radiant temperature (MRT) and air temperature
• Define and compare and contrast north-facing windows
• east and west-facing windows
• south-facing windows according to window placement and glazing types
• Write down the passive cooling methods
• Which one would you recommend for a building in hot/arid climate?
• What SHGC value would you recommend for windows of an office facing west?
• For a passive solar house facing south?
• Write down (sanitary) plumbing system's pipes that we use for waste line according to types of materials
• If our building is functioned as a factory and we are going to use the external waste line pipes for the harmful chemical wastes which pipe we must prefer?
• Describe in words the following terms: gate valve
• reflux (no return valve) tap
• stop valve and drain cock
• Define and compare traps
• Which trap would you recommend for a summer house’s bathroom in which is located at south side of Turkey?
• What is the difference between a valve,a fixture, and a faucet?
• Define and compare funnel water heaters and hermetical water heaters according to the location of the heater
• Give 5 points to be considered in wet space design
• Which equipment should be placed as close as possible to waste water stack (pillar)?
• Why we have to locate hot water pipes above cold water pipes?
• Chimneys or installation shafts provide transmission of vertical pipes
• There are 5 types of shafts write down the names of shafts
• Which shafts would you recommend for use with?
• What is visual perception and binocular vision?
• Describe in words (maybe with the aid of a diagram) the following terms: wave, wavelength and frequency
• Discuss the difference between hue value and chroma according to color specification?
• What is visual comfort?
• Write down the visual comfort parameters
• Discuss physical and physiological parameters
• Discuss the difference between refraction and reflection?
• Write down the elements of a lighting system
• Compare candela
• foot-candle (lux) and lumen
• What does the luminous intensity distribution curves graph represents?
• Identify one situation when excellent color rendering is important
• Identify a situation where color rendering is not so important
• Which lamp-type would be appropriate in each of those situations?
• Incandescent light bulbs produce 95% heat and only 5% visible light
• Fluorescent light bulbs are much more efficient
• According to working principle explain why?
• Write down the types of luminance distribution and compare them according to energy efficiency
• Define and compare wall washing and grazing light
• Write down indoor electrical installation elements and an electrical circuit’s elements?
• Compare concealed installation and under floor installation
• Which type of installation would you recommend for a re-functioned historical building?
• Give a reason for your answer
• What is meant by the term reverberation time?
• What are the factors that tend to make the reverberation time larger?
• Do you think a reverberation time of 0.8 seconds would be appropriate for a classroom?
  

Diğer environmental control systems 2 dersi arama kriterleri

environmental control systems 2 pdf,environmental control systems 2 ders notları,environmental control systems 2 ders notları pdf,environmental control systems 2 konu anlatımı,environmental control systems 2 özet,environmental control systems 2 dersi,environmental control systems 2 konuları,environmental control systems 2 sınava hazırlık,environmental control systems 2 çalışma notları,baü iç mimarlık ve çevre tasarımı ders notları,bahçeşehir üni environmental control systems 2 pdf,bahçeşehir üni. environmental control systems 2 ders notu,iç mimarlık ve çevre tasarımı bölümü öğrencileri için environmental control systems 2 ders notu,iç mimarlar için environmental control systems 2 pdf,çevre kontrol sistemleri 2 ders notu,